reverse relay

General Nitrous Discussion

Moderator: John_Heard

Post Reply
Message
Author
User avatar
stracer859
Posts: 132
Joined: Thu Jun 16, 2005 9:30 pm

reverse relay

#1 Post by stracer859 » Mon Sep 05, 2005 2:20 pm

need to know how to wire it up so that when i let off the transbrake the nitrous comes on??

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

#2 Post by John_Heard » Wed Sep 07, 2005 10:25 am

I just use one of those little cube relays and run the nitrous activation wire (same one that runs through the carb switch) through the normally closed contacts on the relay. Then wire the coil of the relay to the transbrake solenoid hot wire so when the trans brake is on, the relay comes on, which breaks the circuit for the nitrous.

If that don't make sense let me know I'll see if I can sketch up a diagram.

John

Monty Mikho
Posts: 6
Joined: Tue May 24, 2005 10:43 pm

#3 Post by Monty Mikho » Wed Sep 07, 2005 2:58 pm

Image
Image Image

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

#4 Post by John_Heard » Wed Sep 07, 2005 3:11 pm

That's a great diagram Monty, nice job!

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests