nos plates

General Nitrous Discussion

Moderator: John_Heard

Post Reply
Message
Author
User avatar
sunsation540
Posts: 406
Joined: Sun Aug 20, 2006 11:32 pm
Location: Moore OK.

nos plates

#1 Post by sunsation540 » Sun Mar 18, 2007 10:33 pm

what is the diffrence in the 4150 cheater plate and the power shot plate? don't both have 8 holes looks like the fittings are made diffrent one will take jets one wont is there any other diffrence?
make a plan and stick to it !!

mytmouz
Posts: 647
Joined: Thu Sep 21, 2006 1:00 am
Location: Pelahatchie,MS

#2 Post by mytmouz » Sun Mar 18, 2007 10:50 pm

I sent an email to Holley asking this very same question about 2 months ago. The tech's response was if it has 8 holes per bar it was either a Super powershot or a cheater, the only difference was the solenoids used. The 32 hole plates are older big shot plates and now the new cheater plates, the difference is in the size of the holes. The newer big shot plates had 64 holes, the newest big shot plates have 68.The powershot doesn't have jets you can change. All this pertains to the 4150 style plates. Hope this helps.
Trucks are for haulin...

Image

User avatar
sunsation540
Posts: 406
Joined: Sun Aug 20, 2006 11:32 pm
Location: Moore OK.

#3 Post by sunsation540 » Sun Mar 18, 2007 11:18 pm

i use a tunnel ram and bought a pair of ?????? plates each has 10 holes havent seen anything like them so i bought a cheater plate and what i thought was the same but it must be a power shot or sniper ends arent made for jet but the ???? plates have fittings that take jets so i could switch them out and make both adjustable i have a big shot dominator kit that i will use the solinods from and it will never see more than a 150 shot 75per anyway the other mtr uses a 4500 fogger and the big shot kit this is the street mtr but it's down on power thanks john.
make a plan and stick to it !!

mytmouz
Posts: 647
Joined: Thu Sep 21, 2006 1:00 am
Location: Pelahatchie,MS

#4 Post by mytmouz » Mon Mar 19, 2007 1:04 am

I wouldn't use the big shot solenoids, to much flow trying to go through the holes, also the lig 'noids don't do so well jetted down low. I've sent you a p.m.
Trucks are for haulin...

Image

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

#5 Post by Craig W. » Mon Mar 19, 2007 6:43 am

The Sniper plate is the same as a Cheater plate. 8 holes per bar.

The Big Shot plate is vastly superior.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests