Page 1 of 1

68 Camaro Master cut off switch

Posted: Wed Apr 25, 2018 9:54 am
by PANDER
I’m at a stall here as to how or where to install a master cut off switch in my 68 Camaro
With the battery in the trunk running an alternator, and not cutting a gaping hole in the rear panal. Any ideas from Y’all that have the first Gen Camaros that have done it please any info would be greatly
Appreciated thanks.

Re: 68 Camaro Master cut off switch

Posted: Wed May 16, 2018 2:34 pm
by Bruce69Camaro
Sorry, just saw this.
Have you figured out your issue?

Re: 68 Camaro Master cut off switch

Posted: Sat May 19, 2018 7:21 pm
by PANDER
Iv come up with some ideas, but always open for any others, would greatly appreciate it if you have
Some input thanks.

Re: 68 Camaro Master cut off switch

Posted: Mon May 21, 2018 5:12 am
by Bruce69Camaro
Here is how I did mine and I used a punch to make the switch opening, which I think was around 1" or a bit larger.
I have also used a unibit.

Image

Re: 68 Camaro Master cut off switch

Posted: Wed May 23, 2018 3:02 pm
by PANDER
Awesome thanks for the info I’ll give it a shot thank you .