Strange Master cylinder

Everything from the motor to the wheels

Moderator: John_Heard

Message
Author
sc racing
Posts: 1773
Joined: Sun Jun 11, 2006 1:45 pm
Location: Sahuartia Az

#16 Post by sc racing » Thu Mar 06, 2008 7:02 pm

79 Camaro wrote:oic, Well mine looks just like that. But it has the 1.031 bore. thats what they recommended for the four disc Pro race brakes..
The one in the pic is the Strange one but its not going to work so I got the other one.I also have the Strange front brakes but I have the GM metric calipers in the back.

User avatar
TubbedTruck67
Posts: 374
Joined: Wed Oct 25, 2006 11:59 am
Location: Joplin, Mo

#17 Post by TubbedTruck67 » Sun Mar 09, 2008 2:26 pm

Adam Ill be able to use the factory rod in mine. The pedal end has a clevis with a pin and keeper that goes through the pedal then its an adjustable treaded rod that just rests inside the back of the mc. It sits inside the mc about a 1 inch or so so it cant ever fall out but im going to put a retainer on it just in case.

User avatar
79 Camaro
Posts: 738
Joined: Fri Feb 24, 2006 11:38 am
Location: Caney, Ks

#18 Post by 79 Camaro » Wed Mar 19, 2008 10:02 am

Here is a picture of my stock rod and master cylinder..
Attachments
IMG_0834.JPG
"THE THROTTLE IS THE DEVIL" By Mr. Willis
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers

User avatar
TubbedTruck67
Posts: 374
Joined: Wed Oct 25, 2006 11:59 am
Location: Joplin, Mo

#19 Post by TubbedTruck67 » Fri Mar 21, 2008 12:38 pm

Adam that looks exactly like I thought when we were talking. I think you may be able to reuse that rod and if not you could do what we talked about and build one using a heim and a bolt and get rid of that stud the factory rod slips over.

User avatar
79 Camaro
Posts: 738
Joined: Fri Feb 24, 2006 11:38 am
Location: Caney, Ks

#20 Post by 79 Camaro » Fri Mar 21, 2008 2:28 pm

TubbedTruck67 wrote:Adam that looks exactly like I thought when we were talking. I think you may be able to reuse that rod and if not you could do what we talked about and build one using a heim and a bolt and get rid of that stud the factory rod slips over.
Cool, Thanks sam :D
I found out that the recommend pedal ratio for my master cylinder in 5.5 and if I did my measuring right thats what my pedal ratio came out the be.. Thanks again for the help and advice. 8-)
"THE THROTTLE IS THE DEVIL" By Mr. Willis
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests