The one in the pic is the Strange one but its not going to work so I got the other one.I also have the Strange front brakes but I have the GM metric calipers in the back.79 Camaro wrote:oic, Well mine looks just like that. But it has the 1.031 bore. thats what they recommended for the four disc Pro race brakes..
Strange Master cylinder
Moderator: John_Heard
- TubbedTruck67
- Posts: 374
- Joined: Wed Oct 25, 2006 11:59 am
- Location: Joplin, Mo
Adam Ill be able to use the factory rod in mine. The pedal end has a clevis with a pin and keeper that goes through the pedal then its an adjustable treaded rod that just rests inside the back of the mc. It sits inside the mc about a 1 inch or so so it cant ever fall out but im going to put a retainer on it just in case.
- TubbedTruck67
- Posts: 374
- Joined: Wed Oct 25, 2006 11:59 am
- Location: Joplin, Mo
Cool, Thanks samTubbedTruck67 wrote:Adam that looks exactly like I thought when we were talking. I think you may be able to reuse that rod and if not you could do what we talked about and build one using a heim and a bolt and get rid of that stud the factory rod slips over.
I found out that the recommend pedal ratio for my master cylinder in 5.5 and if I did my measuring right thats what my pedal ratio came out the be.. Thanks again for the help and advice.
"THE THROTTLE IS THE DEVIL" By Mr. Willis
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
Who is online
Users browsing this forum: Google [Bot] and 13 guests