Tire size question

Everything from the motor to the wheels

Moderator: John_Heard

Post Reply
Message
Author
coony278
Posts: 66
Joined: Mon Nov 03, 2008 6:31 pm

Tire size question

#1 Post by coony278 » Sun Mar 29, 2009 9:22 pm

If you have a 28x10x15 and switched to a 26x10x15 would the 26" tire have less hook than the 28" ?

I swithched to a 28" slick on my car this year and lost about 500 rpm at the stripe and a 10th in my time. I need that tenth back. I run a index class

So my question is if I buy a 26" slick will the car still hook as good as the 28" slick ?

I was running a 275/50/15 drag radial last year and was having trouble hooking and consistency with it. So I bought a 28" slick and now my hooking problem is cured but I lost my cushion to tune on my time I had.

Maybe I just need to change the gear in the car :scratch: But if you put in a steeper gear in dont you lose strength in the gear?

Any thought would be appreciated!

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: Tire size question

#2 Post by Craig W. » Sun Mar 29, 2009 10:46 pm

Small tires can hook remarkably well, but they are less forgiving to poor track prep or a missed suspension setup.

What index are you running and what rearend is in the car?

Lower gears do have smaller pinions but I haven't seen that be a problem.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

coony278
Posts: 66
Joined: Mon Nov 03, 2008 6:31 pm

Re: Tire size question

#3 Post by coony278 » Mon Mar 30, 2009 7:36 am

I'am running the 7.0 index 1/8th mile. I'am running 4:11 gears. With my old 26" tires the car would trap at 6900 , now i'am going through at 6400 rpm's

So your saying you would go through the trouble to change gears to keep the 28" tire ?

And yes I know that 7.0 is not a fast class but this is just my secound year at drag racing. So i'am still in a learning curve :) And I was having trouble hooking on the 26" drag radial tire last year.
My car this year 60' s in the 1.40's on the 28" tires last year I was in the high 1.50's

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: Tire size question

#4 Post by Craig W. » Mon Mar 30, 2009 8:56 am

Yeah, I'd probably change the gears and try to get your ET cushion back.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
supernova
Posts: 2552
Joined: Sat Feb 02, 2008 7:35 pm
Location: Ft.Worth Tx

Re: Tire size question

#5 Post by supernova » Tue Mar 31, 2009 5:34 am

leave the tire and change the gear. I would try a 4.56 gear for 1/8 mile.
Blackhoodmafia!!!! :mrgreen: :mrgreen:

1972 Nova SS
572 C.I. BBC

Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs

coony278
Posts: 66
Joined: Mon Nov 03, 2008 6:31 pm

Re: Tire size question

#6 Post by coony278 » Thu May 14, 2009 9:06 pm

Just thought I would update on what I did with the tire to get my ET back.

I went ahead and put a 26" slick on the car to see what it would do.

I lost 3 hundreths on the 60' and my ET stayed the same. The wierd thing is now the car totes the front wheels about 30' out at about 2' high. With 28" tire it would barley pick the front wheels up.

So in my conclusion I found no differnce other than it looks kewl toting the front wheels :roll: .

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests