9 Inch ends on a 12 bolt
Moderator: John_Heard
9 Inch ends on a 12 bolt
Hey guys! I have a 12 bolt in my chevelle, with Strange C-clip eliminators, and a set of moser axles. I bought the Moser axles A few years ago, they have all the same dimensions as a stock 12 bolt axle, even the little nubs on the end for the factory C-clips. Anyway, i would like to get rid of the C-clip eliminators, cause the seem to leak, and weld on Ford 9" ends. My question is, will a Ford 9" bearing have the same inside diameter as the 12 bolt axle? My guess is no. If not, is there a bearing that has the outer diameter of the ford bearing and an inner diameter as the 12 bolt axle? Kind of a conversion bearing? Also, if I have 9" ends welded to my housing, how do I make it seal? Don't factory ford 9" rearends have a seal a few inches down in the axle tube? I have also heard of guys running the Olds or Pontiac style of ends, would this be an easier or better option? I know I can't be the only guy who has done this, what is the best way? And don't tell me I need new axles!!!! There is nothing wrong with them and I am on a budget. Actually I am maried with kids .
Re: 9 Inch ends on a 12 bolt
they sell the ends that are just like ford but use the 12 bolt flange bolt patern so you can use all your stock or aftermarket chevy brakes
and if you need or want i can give you the phone number to call for them
and if you need or want i can give you the phone number to call for them
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
Re: 9 Inch ends on a 12 bolt
REALY!!! Who makes those? Yes, I would be interseted in there number. Do you know if I can use my stock style axles with them?
Re: 9 Inch ends on a 12 bolt
toms differentials makes them but gary at the gear shop sells them there number is 1-562-634-1396
so ask for gary and tell him rob from california horsepower&performance had you call you might get a price break we lots of buisness with them
so ask for gary and tell him rob from california horsepower&performance had you call you might get a price break we lots of buisness with them
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
Re: 9 Inch ends on a 12 bolt
I checked them out on Toms dirrerentials .com That looks like what I need. Anyone know if the bearing will work on my current axles? And how do the seal? That's one of my biggest things.
Who is online
Users browsing this forum: No registered users and 54 guests