Alternator with Electric Water Pump
Moderator: John_Heard
Alternator with Electric Water Pump
Guys, how do you mount an alternator with an electric water pump, its in a 71 Nova, with a 400 small block chevy. Any suggestions would help, Pictures would be even better.
Thanks Guys for any input.
Thanks Guys for any input.
I can't wait for race season, this has got to be the year.
Re: Alternator with Electric Water Pump
Like this. I made mine. Now it has a motor plate.
Last edited by supernova on Mon May 23, 2011 12:12 am, edited 1 time in total.
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
Re: Alternator with Electric Water Pump
if you dont have a front motor plate, alan grove makes a nice mount
http://www.alangrovecomponents.com/Smal ... c_Pump.htm
http://www.alangrovecomponents.com/Smal ... c_Pump.htm
- BracketNova
- Posts: 618
- Joined: Sat Apr 25, 2009 6:46 pm
- Contact:
Re: Alternator with Electric Water Pump
Here's my junk...hold your laughter please. I reused the adjustment arm and normal size alternator from my small block and hung the alternator off a 1/4" piece of plate. I welded a spacer to the bottom to move the alternator inline with the crank pulley.
I would like to do something like supernova. Just haven't had the time/money.
-Greg
I would like to do something like supernova. Just haven't had the time/money.
-Greg
"I always compare drag racing to lighting $100 bills on fire, only it's more expensive." - Craig W.
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Check out my website...
http://www.findmoneyraces.com
'71 Nova E85
6.69 @ 100.2 MPH 9/6/14
1.4257 60'
1700' DA
13:1 439 BBC
3330 lbs
Re: Alternator with Electric Water Pump
I have the same issue. I have Front plates. I just makes sure that I charge the car after every pass.
1967 Camaro
Hey I gotta 9 sec car, in the 8th! lol
Jegs
Mike Curley Racing
Capital Raceway
Maryland International Raceway
Hey I gotta 9 sec car, in the 8th! lol
Jegs
Mike Curley Racing
Capital Raceway
Maryland International Raceway
Re: Alternator with Electric Water Pump
Thanks guys, I picked up a Moroso bracket, then for the bottom pulley I had to shim out the pulley, so I drilled out two nuts and 2 thin washers so I could line the brackets back up.
Thanks everyone.
Thanks everyone.
I can't wait for race season, this has got to be the year.
Re: Alternator with Electric Water Pump
The belt has never came off...Not even at 7600 RPM's. I started with a low mount kit and modified it to fit in the stock '70 Camaro engine compartment.
Frank
Just another 10 second Camaro...
Re: Alternator with Electric Water Pump
R u running front plates?
1967 Camaro
Hey I gotta 9 sec car, in the 8th! lol
Jegs
Mike Curley Racing
Capital Raceway
Maryland International Raceway
Hey I gotta 9 sec car, in the 8th! lol
Jegs
Mike Curley Racing
Capital Raceway
Maryland International Raceway
Re: Alternator with Electric Water Pump
Low mount alt with front plate...
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Re: Alternator with Electric Water Pump
Where u get the low bracket?
1967 Camaro
Hey I gotta 9 sec car, in the 8th! lol
Jegs
Mike Curley Racing
Capital Raceway
Maryland International Raceway
Hey I gotta 9 sec car, in the 8th! lol
Jegs
Mike Curley Racing
Capital Raceway
Maryland International Raceway
Re: Alternator with Electric Water Pump
try these
http://www.summitracing.com/parts/SME-2027/
http://www.summitracing.com/parts/BSP-FM0205PC/
http://www.summitracing.com/parts/PWM-897/
http://www.summitracing.com/parts/PWM-775/
http://www.summitracing.com/parts/PWM-890/
http://www.summitracing.com/parts/WND-64222/
we are making these but i can't get my machinist to make the adpter that converts it from sbc to bbc like i have on my car. they are made for the cs130 alternator which is far more superior to the older style gm alternator in just about every way plus puts out a lot more amps at idle
http://www.summitracing.com/parts/SME-2027/
http://www.summitracing.com/parts/BSP-FM0205PC/
http://www.summitracing.com/parts/PWM-897/
http://www.summitracing.com/parts/PWM-775/
http://www.summitracing.com/parts/PWM-890/
http://www.summitracing.com/parts/WND-64222/
we are making these but i can't get my machinist to make the adpter that converts it from sbc to bbc like i have on my car. they are made for the cs130 alternator which is far more superior to the older style gm alternator in just about every way plus puts out a lot more amps at idle
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
Who is online
Users browsing this forum: No registered users and 2 guests