Page 1 of 1

turbo 400 valve body

Posted: Fri May 11, 2012 7:56 am
by joe69Z
Trying to remove 1-2 shifting valve to be able to shift manually by grinding flats on small journal. How do I remove Plug at back of body, I have roll pin out but it doesn't want to come out, Don't want to break valve body. Any ideas? :scratch:

Re: turbo 400 valve body

Posted: Wed May 16, 2012 8:48 pm
by joe69Z
Got it out and reassembled ready for test and tune tommorow night.