You and your ride... Post it here get to know everyone...
Moderator: John_Heard
-
- Posts: 111
- Joined: Mon Nov 17, 2008 11:38 pm
Re: You and your ride... Post it here get to know everyone...
Nice ride man, love the wheels! but i'm a bit biased sice i own the same ones!
Re: You and your ride... Post it here get to know everyone...
Hello I’m Pedro I’m 27 years old and i’m from Portugal.
I’m studding how to read plugs for a couple of weeks till now and your articles was the ones I liked more. In a way to enlarge my knowledge I decided to register on this forum to get information about reading plugs and other stuff.
Thanks
My ride is 93 Honda civic EG6.
Regards
Really sorry about my english
I’m studding how to read plugs for a couple of weeks till now and your articles was the ones I liked more. In a way to enlarge my knowledge I decided to register on this forum to get information about reading plugs and other stuff.
Thanks
My ride is 93 Honda civic EG6.
Regards
Really sorry about my english
Showing off is the fool's idea of glory.
Re: You and your ride... Post it here get to know everyone...
Thanks for all of the complements's.
Rob, the front end is fiberglass on hydraulic rods. The hood is molded into some 1 1/4 DOM. Here are some pictures of the front end off of the car. I have to get a new digital camera, when I do i will take detailed pictures of how it is mounted to the front clip.
Here is a picture of the interior.
Picture of the engine before the engravings
Rob, the front end is fiberglass on hydraulic rods. The hood is molded into some 1 1/4 DOM. Here are some pictures of the front end off of the car. I have to get a new digital camera, when I do i will take detailed pictures of how it is mounted to the front clip.
Here is a picture of the interior.
Picture of the engine before the engravings
1971 Pro-Street Camaro
-
- Posts: 27
- Joined: Mon Mar 03, 2008 1:34 am
- Location: Aylesbury
- Contact:
Re: You and your ride... Post it here get to know everyone...
Welcome - What do you use your Honda for? Anything special done to it?Clutch wrote:Hello I’m Pedro I’m 27 years old and i’m from Portugal.
I’m studding how to read plugs for a couple of weeks till now and your articles was the ones I liked more. In a way to enlarge my knowledge I decided to register on this forum to get information about reading plugs and other stuff.
Thanks
My ride is 93 Honda civic EG6.
Regards
Really sorry about my english
---
Cheers
Henrik Morsing
'89 Volvo 240GLT B230E/AW70
'70 Chevrolet Chevelle Malibu "Big Red" 350/TH350/3.42 Posi, 60" 2.216s - 14.57@92.30 - 3560lbs
http://www.morsing.cc/Personal/Cars/Chevelle.html
Cheers
Henrik Morsing
'89 Volvo 240GLT B230E/AW70
'70 Chevrolet Chevelle Malibu "Big Red" 350/TH350/3.42 Posi, 60" 2.216s - 14.57@92.30 - 3560lbs
http://www.morsing.cc/Personal/Cars/Chevelle.html
Re: You and your ride... Post it here get to know everyone...
Is the only car I have so It's got to do everything
Daily drive car and track car at the weekend with a little bit of top speed runs at the night time with friends.
I'm trying for a couple of years to puch every horse from my engine with some studing and know how, really don't trust anyone here to do that for me and I want always to be made by me.
I still bealive that I can do better, but is hard and the failure is always my shadow...
Daily drive car and track car at the weekend with a little bit of top speed runs at the night time with friends.
I'm trying for a couple of years to puch every horse from my engine with some studing and know how, really don't trust anyone here to do that for me and I want always to be made by me.
I still bealive that I can do better, but is hard and the failure is always my shadow...
Showing off is the fool's idea of glory.
Re: You and your ride... Post it here get to know everyone...
thanks vader 2
i did one for a customer but i had to split the fender i'll post some picture's when he brings the car back in a week. but i like the way your's works with the whole fender . looks like you have lots of time in your car and some real nice work to.
enjoy the site lot's of great people here and lots of knowledge also
looking forward to see more pictures
rob
i did one for a customer but i had to split the fender i'll post some picture's when he brings the car back in a week. but i like the way your's works with the whole fender . looks like you have lots of time in your car and some real nice work to.
enjoy the site lot's of great people here and lots of knowledge also
looking forward to see more pictures
rob
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
Re: You and your ride... Post it here get to know everyone...
ClutchClutch wrote:Is the only car I have so It's got to do everything
Daily drive car and track car at the weekend with a little bit of top speed runs at the night time with friends.
I'm trying for a couple of years to puch every horse from my engine with some studing and know how, really don't trust anyone here to do that for me and I want always to be made by me.
I still bealive that I can do better, but is hard and the failure is always my shadow...
Welcome to the forum -nice to see that gearheads live all over the world :)
No worries about your english - like me, I'll bet a lot of folks on this forum probably speak only one language so you're way ahead of most of us :)
Good luck with your ride - lots of knowledgeable folks here doing lots of cool stuff - I learn something new everyday here.
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Re: You and your ride... Post it here get to know everyone...
No worries about your english - like me, I'll bet a lot of folks on this forum probably speak only one language so you're way ahead of most of us :)
a big high 5 on that wikd69 very well put
yes and welcome clutch you will enjoy it here
rob
a big high 5 on that wikd69 very well put
yes and welcome clutch you will enjoy it here
rob
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
Re: You and your ride... Post it here get to know everyone...
Showing off is the fool's idea of glory.
- Bowtiestang
- Posts: 71
- Joined: Sat Nov 29, 2008 8:31 pm
- Location: TUCSON AZ
Re: You and your ride... Post it here get to know everyone...
Hello everyone! I am new to the board, my name is Robert. I live on Tucson AZ. Here is a little info on my rides.
First the Bowtiestang..
1990 Ford Mustang with a 350 Chevy.
Started as a 4cly AT car here is a little bit of the build up...
Ond the others..
1996 Supras (wifes)
1998 Z-28 (the deadly bracket car )
Talk to you all soon...
First the Bowtiestang..
1990 Ford Mustang with a 350 Chevy.
Started as a 4cly AT car here is a little bit of the build up...
Ond the others..
1996 Supras (wifes)
1998 Z-28 (the deadly bracket car )
Talk to you all soon...
"If you want to run from a roll...build a dirt track car!"
Re: You and your ride... Post it here get to know everyone...
Welcome Bowtiestang glad to see some more people from the desert . Nice looking rides.I think Ive seen the camaro at SIR but not the stang did you just finish it?
Re: You and your ride... Post it here get to know everyone...
And the blue oval guys are choking on their beer as we speakBowtiestang wrote:Hello everyone! I am new to the board, my name is Robert. I live on Tucson AZ. Here is a little info on my rides.
First the Bowtiestang..
1990 Ford Mustang with a 350 Chevy.
Talk to you all soon...
Welcome to the forum :)
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Re: You and your ride... Post it here get to know everyone...
Hey guys just joined looking for tons of info i can put to use. My names Allen I'm 20 Phoenix, Az and not married. I go to school full time for criminal justice. I bought a 68 Camaro back in February while i was home on leave from Iraq had a small block in it, got rid of that motor because i didn't trust the guy who built the car (if you saw it you'd understand) currently has no front end on it and its about to get moved to a larger shop so i can pull off the front clip and put in a lighter on. motor planned is another small block either a 355 on spray or a 383 with a procharger, th400, Dana 60, 4.11 and ladders out back. The guy who built the car put air bags in the rear... so those are gonna go. i'm not sure what i'm wanting to run but i want 11.5's on motor and 10's on spray
the way its sitting now
engine shots
just for fun
work is slow as college takes up a lot of my money
the way its sitting now
engine shots
just for fun
work is slow as college takes up a lot of my money
- Bowtiestang
- Posts: 71
- Joined: Sat Nov 29, 2008 8:31 pm
- Location: TUCSON AZ
Re: You and your ride... Post it here get to know everyone...
Last time the stang was a SIR was Super Chevy.. work was so busy just didnt have time to race..... so i got a new job I am puting the new motor in right now and will be out much more.. will run at Firebird and SIR. The Supra hasnt been out much due to trannys blowing up...doing a TH400 swap in that (then hitting it with lots more boost).... The ole LS1 is the only one out playing mast few months.....sc racing wrote:Welcome Bowtiestang glad to see some more people from the desert . Nice looking rides.I think Ive seen the camaro at SIR but not the stang did you just finish it?
"If you want to run from a roll...build a dirt track car!"
Re: You and your ride... Post it here get to know everyone...
My name is Dave C and live in Vero Beach FL. I work as a aerospace propulsion and mechanical systems engineer. I bought my nova last year from a guy in CA. I drove from Huntsville AL to CA to get it. The car is solid but had some minor rust in the floor pans and had been used as a race car during the 90's I am guessing. I stripped the entire car down once it was in my garage even though it was running when I got it. Much of the systems were out dated. A short description:
406 SB Chevy
AL Trick Flow Heads/Roller Rockers
Strip Dominator Intake
Holly DBL Pumper
Ford 9" Rear
Mark Williams High Torque Axles and Thrid member
MT ET Drag Slicks 29.5X11.5X15
I have worked on it for a year and have it comming back to gether, it was wet sanded and is ready for paint, and has already been jammed. Next will be 2 double adjustable Afco coil overs, painless wire harness, and some gauges.
http://picasaweb.google.com/ACMIFIREGUN ... WaKYKnuwc#
406 SB Chevy
AL Trick Flow Heads/Roller Rockers
Strip Dominator Intake
Holly DBL Pumper
Ford 9" Rear
Mark Williams High Torque Axles and Thrid member
MT ET Drag Slicks 29.5X11.5X15
I have worked on it for a year and have it comming back to gether, it was wet sanded and is ready for paint, and has already been jammed. Next will be 2 double adjustable Afco coil overs, painless wire harness, and some gauges.
http://picasaweb.google.com/ACMIFIREGUN ... WaKYKnuwc#
Last edited by Davec on Sun Nov 30, 2008 7:13 pm, edited 3 times in total.
Who is online
Users browsing this forum: No registered users and 5 guests