sharing some of my progress
Moderator: John_Heard
sharing some of my progress
i have been so busy with my buisness but i decided it's time to put it back together here's some quick pictures i took today it's not no show car it's a race car lol so don't look at the dust covering the whole car lol
i just put the motor in to mark everything up it still needs to go to the dyno and hopefully i will have my headers soon also
rob
i just put the motor in to mark everything up it still needs to go to the dyno and hopefully i will have my headers soon also
rob
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
Re: sharing some of my progress
If its not a show car ..It looks like it could be one very very nice
Re: sharing some of my progress
Your not kidding around are you? Looks bad ass
73 Vette, moly back half
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter
Re: sharing some of my progress
That looks nice Rob.
When are you going to take it out?
What size is the motor?
When are you going to take it out?
What size is the motor?
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
- rustbucket
- Posts: 566
- Joined: Tue Aug 15, 2006 6:36 pm
- Location: central alabama
Re: sharing some of my progress
406sbc, powerglide, nitrous
http://youtube.com/watch?v=DssW5vc_t3k
http://youtube.com/watch?v=DssW5vc_t3k
Re: sharing some of my progress
it's a 572 now getting my hands on that manifold was task tho i never expected getting a manifold would be so hard for a bbc but being a tall deck and the heads i have made it a chore to find the right manifold even then i had to go and port the complete manifold. i just want to run the dam thing lol so to answer your question chris lol probably not till the end of january i'm waiting on my headers from lemmons and it won't be on the dyno till the second week of january ?(my engine builder expects to see 1040 or more out of it i so hope is right) after that i have to get my converter and so on and so on why does this have to be so friggen hard lol.
so bottom line the first week of febuary i should run it and have a time slip in my hands oh i should start a passtime thread lol
oh and to top it off it's to tall for my hood grrrr but i have a friend that owns a body shop putting a aero scoop on the hood should look cool tho
rob
so bottom line the first week of febuary i should run it and have a time slip in my hands oh i should start a passtime thread lol
oh and to top it off it's to tall for my hood grrrr but i have a friend that owns a body shop putting a aero scoop on the hood should look cool tho
rob
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
-
- Posts: 329
- Joined: Wed Oct 29, 2008 7:14 pm
- Location: New Jersey
Re: sharing some of my progress
It will run better if you get rid of that 3rd circuit on that carb
Re: sharing some of my progress
It's not shiny paint and chrome goodies that make for a beautiful ride - that motor and the car and the color scheme, and the fact that it'd prolly scare the hell out of me, all make your ride a sweet piece of work.
Forget show car comparisons - hotrods aren't meant to be polished and stared at, they're meant to scare people
I think your's will do that once you hit the track - that's a beautiful and wicked looking ride.
Forget show car comparisons - hotrods aren't meant to be polished and stared at, they're meant to scare people
I think your's will do that once you hit the track - that's a beautiful and wicked looking ride.
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
-
- Posts: 61
- Joined: Sat Sep 13, 2008 1:06 pm
Re: sharing some of my progress
looks nice
-
- Posts: 329
- Joined: Wed Oct 29, 2008 7:14 pm
- Location: New Jersey
Re: sharing some of my progress
Are you going to Dyno that??? I would be real interested in seeing the AFR on Idle and part throttle and full throttle....With that carb as I HAD one just like it
Re: sharing some of my progress
yes i will be dynoing it but they are not afr's? or are you saying your set up is afr?i'll post my dyno numbers when i dyno it hopefully it will be like in 2 weeks like we have schedule
rob
rob
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
-
- Posts: 329
- Joined: Wed Oct 29, 2008 7:14 pm
- Location: New Jersey
Re: sharing some of my progress
chpcamaro wrote:yes i will be dynoing it but they are not afr's? or are you saying your set up is afr?i'll post my dyno numbers when i dyno it hopefully it will be like in 2 weeks like we have schedule
rob
Will the dyno you going to use have a Air Fuel ratio capability ???
Re: sharing some of my progress
the one i am think i will be using i'm pretty sure they do thats all they do there is dyno they have 4 dyno cells and 1 chassis dyno but the one i might try is new and around the corner from my shop he just opened i don't know if he will but i will check and post back
rob
rob
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
Re: sharing some of my progress
well a few inches closer to being done now i got everything done on the front of the motor
and all the electrical done and my chutes done and hopefuly my hood will be done this weekend then down to the airbrusher for the new name on the hood and the airbrushed grill oh and i want opinons on this do you think this would be fround apond for what i want to write on the back or offend people ok here it is now this will be airbrushed across my rear fin
Who's The BIATCH Now
here's a few pic's i will post some more tomorrow
and the chute installed
and this i put together i was thinking of having this airbrushed on top of my new aero scoop what do you think yeah or neah now it won't be blue paint it will be orange to go with the theme
here's the car with the scoop just sitting on it
thanks
rob
and all the electrical done and my chutes done and hopefuly my hood will be done this weekend then down to the airbrusher for the new name on the hood and the airbrushed grill oh and i want opinons on this do you think this would be fround apond for what i want to write on the back or offend people ok here it is now this will be airbrushed across my rear fin
Who's The BIATCH Now
here's a few pic's i will post some more tomorrow
and the chute installed
and this i put together i was thinking of having this airbrushed on top of my new aero scoop what do you think yeah or neah now it won't be blue paint it will be orange to go with the theme
here's the car with the scoop just sitting on it
thanks
rob
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
Re: sharing some of my progress
Man, thats awesome - wish I could watch you run.chpcamaro wrote:well a few inches closer to being done now i got everything done on the front of the motor
and all the electrical done and my chutes done and hopefuly my hood will be done this weekend then down to the airbrusher for the new name on the hood and the airbrushed grill oh and i want opinons on this do you think this would be fround apond for what i want to write on the back or offend people ok here it is now this and this i put together i was thinking of having this airbrushed on top of my new aero scoop what do you think yeah or neah now it won't be blue paint it will be orange to go with the theme
here's the car with the scoop just sitting on it
thanks
rob
And yeah, the rat spilling paint is great
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Who is online
Users browsing this forum: No registered users and 67 guests