You and your ride... Post it here get to know everyone...

Bench Racing - Misc. Discussions

Moderator: John_Heard

Message
Author
User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: You and your ride... Post it here get to know everyone..

#976 Post by John_Heard » Sat May 15, 2010 6:15 am

Image

Good looking Chevelle!

496blazer
Posts: 17
Joined: Sun Apr 12, 2009 2:27 am

Re: You and your ride... Post it here get to know everyone..

#977 Post by 496blazer » Wed Jun 02, 2010 9:45 pm

New guy here from California. I have lurked here for quit a while but just recently found a car to build. Its a 69 Nova 6 cyl car that will soon have a built 496, turbo 400 and dana 60 rear. I already have the engine, trans, full caltrac suspension and other goodies. Still need to order the rearend. Right now the subframe is off and all the body bushings, control arms bushing are getting replaced. Also uprgrading the front to disk. Looking forward to getting it going here in the next few months.

Thanks Todd

Image

Image

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: You and your ride... Post it here get to know everyone..

#978 Post by John_Heard » Wed Jun 02, 2010 9:54 pm

All right.. Score another one for the Nova's! Those dang Camaro's were starting to get a foot hold here lately.

Welcome to the site Todd..

PS - Why a Dana 60 and not a 9"? Those are quite a bit heavier...

496blazer
Posts: 17
Joined: Sun Apr 12, 2009 2:27 am

Re: You and your ride... Post it here get to know everyone..

#979 Post by 496blazer » Wed Jun 02, 2010 10:08 pm

John_Heard wrote:All right.. Score another one for the Nova's! Those dang Camaro's were starting to get a foot hold here lately.

Welcome to the site Todd..

PS - Why a Dana 60 and not a 9"? Those are quite a bit heavier...
Thanks for the welcome!

The Dana appeals to me for the following reasons.
1. Very strong
2. Strange Eng. has a really good deal on these for what you get. Under 1900 bucks for a new housing, spool, 35 spline axles with studs, street gears and built to my width specs with spring perches installed.
3. Look cool from the back. 8-)



I know they are heavier but I really am not looking to save every pound or care to chase gear ratios. Am I making a big mistake in your opinion?

Thanks Todd

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: You and your ride... Post it here get to know everyone..

#980 Post by John_Heard » Wed Jun 02, 2010 10:20 pm

You've got the disadvantages nailed, but if those things aren't that important then it's certainly strong enough. Really just depends on what you want to do with the car. Dana 60's do look sexy..

User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: You and your ride... Post it here get to know everyone..

#981 Post by wikd69 » Wed Jun 02, 2010 10:36 pm

John_Heard wrote:All right.. Score another one for the Nova's! Those dang Camaro's were starting to get a foot hold here lately.

Welcome to the site Todd..

PS - Why a Dana 60 and not a 9"? Those are quite a bit heavier...
John, you need us Camaro guys around to remind you of the better things in life :mrgreen:
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

User avatar
ytnova
Posts: 735
Joined: Fri Oct 28, 2005 9:21 am
Location: orlando, florida/ under a hood
Contact:

Re: You and your ride... Post it here get to know everyone..

#982 Post by ytnova » Thu Jun 03, 2010 9:07 am

WOO HOO!, another nova guy. Welcome
I am not really sure what the question is, but I am pretty sure the answer is Big Block.

User avatar
Bruce69Camaro
Posts: 1799
Joined: Thu Jul 23, 2009 11:07 am
Location: PA

Re: You and your ride... Post it here get to know everyone..

#983 Post by Bruce69Camaro » Thu Jun 03, 2010 11:08 am

Hey Todd,

Looks like you found yourself a nice car, it's not a Camaro, but it will do, right Harry... :smt005 :smt005

Please tell me those "big" meats in the garage are for the Nova?

What do you plan to do with the car?

Hey John, it's cool to be jealous ;)

Bruce
Those who think they know it all have no way of finding out they don't......... :scratch:

427belair
Posts: 284
Joined: Tue Aug 15, 2006 10:23 pm
Location: greatfalls,mt

Re: You and your ride... Post it here get to know everyone..

#984 Post by 427belair » Fri Jun 04, 2010 3:23 pm

Just so you know anything bigger than 10.5" is a waste...some of them big tired cars do look pretty mean

User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: You and your ride... Post it here get to know everyone..

#985 Post by wikd69 » Fri Jun 04, 2010 3:32 pm

Bruce69Camaro wrote:Hey Todd,

Looks like you found yourself a nice car, it's not a Camaro, but it will do, right Harry... :smt005 :smt005

Please tell me those "big" meats in the garage are for the Nova?

What do you plan to do with the car?

Hey John, it's cool to be jealous ;)

Bruce
Correcto :)
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

User avatar
supernova
Posts: 2552
Joined: Sat Feb 02, 2008 7:35 pm
Location: Ft.Worth Tx

Re: You and your ride... Post it here get to know everyone..

#986 Post by supernova » Fri Jun 04, 2010 4:40 pm

Nova's Rule!!!!!!!!!!!!!! :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :thumb:
Blackhoodmafia!!!! :mrgreen: :mrgreen:

1972 Nova SS
572 C.I. BBC

Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs

496blazer
Posts: 17
Joined: Sun Apr 12, 2009 2:27 am

Re: You and your ride... Post it here get to know everyone..

#987 Post by 496blazer » Fri Jun 04, 2010 9:16 pm

Bruce69Camaro wrote:Hey Todd,

Looks like you found yourself a nice car, it's not a Camaro, but it will do, right Harry... :smt005 :smt005

Please tell me those "big" meats in the garage are for the Nova?

What do you plan to do with the car?

Hey John, it's cool to be jealous ;)

Bruce

The meats are cool, but I think you guys would kick my a$$ off this forum if I put them on my Nova. :lol:

Image


As for my plans, I have always wanted to go drag racing so thats what I plan to do. Not competitivly but more of a hobbie and to show my kids how to work on a car. The car will have a 275-60-15 drag radial or 28x9 slicks. It will not be a long distance car since the current engine I have is 13.1 with a pretty stout solid roller. I do plan on driving it around town once in a while.

Thanks again for all the welcomes. I am sure you will all be sick of me once all the newbie questions start rolling in.



Todd

User avatar
vegaracer
Posts: 676
Joined: Mon Aug 20, 2007 1:12 pm
Location: Wyoming, Ontario, CANADA

Re: You and your ride... Post it here get to know everyone..

#988 Post by vegaracer » Fri Jun 04, 2010 11:25 pm

Those must be the new rain slicks that M/T was coming out with. :smt005
Welcome to DragStuff.
Feenstra's Towing

1973 Vega
434 SBC, N.A.
Powerglide
9.01 @ 146

Josh Mclean
Posts: 4
Joined: Mon Jun 14, 2010 1:14 pm

Re: You and your ride... Post it here get to know everyone..

#989 Post by Josh Mclean » Mon Jun 14, 2010 1:56 pm

Hello im josh,
im only 12 but i really am intrested in Drag cars, i always love to get to know other people and learn about engines.
Thanks !

User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: You and your ride... Post it here get to know everyone..

#990 Post by wikd69 » Mon Jun 14, 2010 2:03 pm

Josh Mclean wrote:Hello im josh,
im only 12 but i really am intrested in Drag cars, i always love to get to know other people and learn about engines.
Thanks !
Josh, welcome to the site !!!! Lotsa great people here with lotsa great hardware :)

What kind of cars are your favorite ?
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 98 guests