New combo, project advice, opinions?

Bench Racing - Misc. Discussions

Moderator: John_Heard

Post Reply
Message
Author
User avatar
Hitchcock
Posts: 1535
Joined: Fri Sep 12, 2008 6:57 pm
Location: Wichita

New combo, project advice, opinions?

#1 Post by Hitchcock » Sun Sep 14, 2008 9:41 pm

Well, here is the 73 vette we are setting up, 496 cu in, fully ported canfield 310 heads, with a full hand port that have a cross section of 1.75x2.45=4.2 total cross section, max flow is 350 @.700 on a 4.31 bore plate, and 225@.700 on the exh. with no pipe. 2.30 & 1.88 valves, with titanium retainers, comp 1.7 ratio magnum rockers. Right now it has a weiand Team G, and an 1150 (7320) diominator, but we are talking a tunnel ram with two 1050's. Srp 18 cc. dome pistons, put .005 down in the hole, and the heads have 113 cnc. chambers so static cr is gonna be around 10.5-10.75 after the head gasket. Cam is a custom comp 4-7 swap .744 .714 lift 278-288@.050 on a 113 LSA, and 110 ICL.
The car gonna be 4-linked and coil overs, and probably 4.56 gears with a 28x10.5 slick. The trans is a th 400 with a 9 in. tci converter with 5200 stall. We are hoping to take the car's weight from 3500 lb all iron sbc with driver to 3300 raceweight with aluminun top end bbc. questions, comments, opinions, and predictions are all welcome. This is a first effort for me so any help is much appreicated. thanks

http://i168.photobucket.com/albums/u188 ... vette4.jpg
http://i168.photobucket.com/albums/u188 ... vette2.jpg
http://i168.photobucket.com/albums/u188 ... 040065.jpg
http://i168.photobucket.com/albums/u188 ... 040067.jpg
73 Vette, moly back half
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 33 guests