THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
Moderator: John_Heard
-
- Posts: 1065
- Joined: Sat Feb 04, 2006 10:14 pm
- Location: New Jersey
THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
Finally fired it up broke in the cam,etc. Have a header leak i need to fix yet and dail in the timing and carb yet.
http://videos.streetfire.net/vidiac.swf ... 35016edc54
http://videos.streetfire.net/vidiac.swf ... 35016edc54
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
Looks good! I kept thinking to myself man that guys is throttle happy watching that. Sounds good though, what's the specs on it?
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
Good to see you got it running, sounds good
-
- Posts: 1065
- Joined: Sat Feb 04, 2006 10:14 pm
- Location: New Jersey
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
I had to keep it running as everything is just done by ear, my timing light took a crap. It's a 357
11 1/2 to 1 on compression
small cam 545/585
Lunati rotating assembly
202 fuelie heads max ported
1.5 roller rockers
victor jr. intake
msd 7al2
glide with brake
11 1/2 to 1 on compression
small cam 545/585
Lunati rotating assembly
202 fuelie heads max ported
1.5 roller rockers
victor jr. intake
msd 7al2
glide with brake
- Carolina Kid
- Posts: 254
- Joined: Sat Jul 26, 2008 10:56 am
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
What have I got to have to view video?Necessary Evil wrote:
http://videos.streetfire.net/vidiac.swf ... 35016edc54
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
That turned out real nice looking under the hood. Especially the smooth firewall
-
- Posts: 1065
- Joined: Sat Feb 04, 2006 10:14 pm
- Location: New Jersey
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
Thanks guys all the hard work paid off. Now if i can just fix that dam nasty header leak. Sounds like a loose rocker or lifter but i checked the lash about 3 times now and all are good. Any good ideas on any decent gaskets out there? Or should i cut the flange to release the bow if there is one in the header?
- hugger73hatch
- Posts: 360
- Joined: Sun Oct 21, 2007 10:42 pm
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
I had a set of reusable header gaskets a couple of years ago that were made out of aluminum, I think. They had like 6 layers and were guaranteed not to burn out. I remember I got them from advance and they were like $40, but they worked really well. I just can't remember the brand name. I will see if I can figure them out and let you know.
73 Nova Hatchback, 408 Small Block 13-1, Iron Heads, 6.972 @ 98.362, 1.468 60', 3450 lbs, still tuning
28 x 9 Slick, N/A
http://www.esquireservices.net
28 x 9 Slick, N/A
http://www.esquireservices.net
- hugger73hatch
- Posts: 360
- Joined: Sun Oct 21, 2007 10:42 pm
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
Got it. They were made by flowtech. Looks like the price has gone up on them since I had a set, but man they work good.
http://store.summitracing.com/partdetai ... toview=sku
http://store.summitracing.com/partdetai ... toview=sku
73 Nova Hatchback, 408 Small Block 13-1, Iron Heads, 6.972 @ 98.362, 1.468 60', 3450 lbs, still tuning
28 x 9 Slick, N/A
http://www.esquireservices.net
28 x 9 Slick, N/A
http://www.esquireservices.net
-
- Posts: 1065
- Joined: Sat Feb 04, 2006 10:14 pm
- Location: New Jersey
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
Thanks for the info Hugger. Does it matter if i use the round or square port? Only asking because the pic from Summit show round. I think i need the squares. You know what i seen these today at Autozone i should of picked them up. They were 42.00
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
part # 99150 for the square ones.
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
Beauty !!!!!
Man, that sure sounds good. Nice job on the motor, and nice job on the rest of the build. It sounds and looks sweet.
Congrat on getting it cooking.... :)
Man, that sure sounds good. Nice job on the motor, and nice job on the rest of the build. It sounds and looks sweet.
Congrat on getting it cooking.... :)
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
- hugger73hatch
- Posts: 360
- Joined: Sun Oct 21, 2007 10:42 pm
Re: THE NOVA IS RUNNING!!!!!!!!!!!!!!!!!!!!!!!
Necessary Evil wrote:Thanks for the info Hugger. Does it matter if i use the round or square port? Only asking because the pic from Summit show round. I think i need the squares. You know what i seen these today at Autozone i should of picked them up. They were 42.00
I think I had the square ones too. I was very pleased with them. I think I may have sold them with the truck.
73 Nova Hatchback, 408 Small Block 13-1, Iron Heads, 6.972 @ 98.362, 1.468 60', 3450 lbs, still tuning
28 x 9 Slick, N/A
http://www.esquireservices.net
28 x 9 Slick, N/A
http://www.esquireservices.net
Who is online
Users browsing this forum: Bing [Bot] and 13 guests