Newbie Welcomes?
Posted: Thu May 12, 2005 5:14 pm
Is this where we can introduce ourselves? 
Hi Paul,
Sure! Great place to get to know the new members on the board. Thanks for stopping by.
John
Page 1 of 2
Posted: Thu May 12, 2005 5:17 pm
Posted: Thu May 12, 2005 5:24 pm
Posted: Thu May 12, 2005 5:25 pm
....thats betterPosted: Thu May 12, 2005 5:30 pm
Hi Jimmy - glad to see you make it... Folks Jimmy's a star... 
Go to his link www.jimmybiggstv.com and watch some of his video. Good stuff.. Glad to have ya here Jimmy.
Go to his link www.jimmybiggstv.com and watch some of his video. Good stuff.. Glad to have ya here Jimmy.Posted: Thu May 12, 2005 6:04 pm
I'm stranded at work right now... two computers with CPU's maxed out rebuilding 18,000+ web images.Beyond wrote:Hi Paul,
Sure! Great place to get to know the new members on the board. Thanks for stopping by.
John
Anyway, thanks for the welcome. Nice to see more Drag Racing interest in the area. Seems everyone is a bit behind in the web world. 8)
Newbie
Posted: Thu May 12, 2005 6:22 pm
Hi Paul.....Welcome. I,m a newbie too. Still working on trying to get my exhaust system finished, so I can make your club event on the 21st. Would you believe no one in Iola can do it. Gonna have to trailer it out of town. 
Roger
Still working on trying to get my exhaust system finished, so I can make your club event on the 21st. Would you believe no one in Iola can do it. Gonna have to trailer it out of town. RogerHello everyone
Posted: Thu May 12, 2005 9:32 pm
Just a quick hello to everyone out there and to John, i wsh you good luck racing this year and i look forward to helping you with that new system my friend.
Johnny B.
PS I posted a hello in the N2O section too, sorry
Johnny B.
PS I posted a hello in the N2O section too, sorry
Posted: Thu May 12, 2005 10:02 pm
Welcome to the forum's Johnny... That must have fixed the signup problem... Glad to have you here!
Johnny can come up with some evil nitrous systems - we'll have to get a picture of your motor on here sometime
Note to other AOL users. Earlier today we had a ranson note turned on when you clicked on your email to validate your account. I don't think some were able to see the letters in the images, I turned that feature off. If you're having problems getting signed up please email admin@dragstuff.com and we'll get you fixed up.
Johnny can come up with some evil nitrous systems - we'll have to get a picture of your motor on here sometime
Note to other AOL users. Earlier today we had a ranson note turned on when you clicked on your email to validate your account. I don't think some were able to see the letters in the images, I turned that feature off. If you're having problems getting signed up please email admin@dragstuff.com and we'll get you fixed up.
Posted: Fri May 13, 2005 7:20 am
Looks like the board is going to be a success John and with the people on here so far, its going to be a great resource.
It appears that I'll be missing next weeks race, so that'll make two in a row. Gotta find more time to get the engine finished up!
It appears that I'll be missing next weeks race, so that'll make two in a row.
Gotta find more time to get the engine finished up!Posted: Fri May 13, 2005 7:54 am
I think it's going to do ok, should be fun.
I could have had my crank installed last night if I had remembered to pick up a rear seal yesterday.. at least the clearances look fine, about .0025 on all of them. I know what you mean about missing races
I could have had my crank installed last night if I had remembered to pick up a rear seal yesterday.. at least the clearances look fine, about .0025 on all of them. I know what you mean about missing races
Posted: Fri May 13, 2005 8:29 am
Things should start going faster for me after Monday (as long as I quit changing my mind about things like I did with the rods!).
I'm really close to having everything I need. I thought I was going to get away with using the pushrods I have, but then I realized the Isky lifters are much taller than the old horizontal bar lifters I was using before. Oh well, there's another $90 gone.
At least Ebay got me some decent money for the 4.56 and 5.13 gears. Its going to be weird using 4.10s. I won't know what to do with streetable gears after running 4.88s and 5.13s for so long
I'm really close to having everything I need. I thought I was going to get away with using the pushrods I have, but then I realized the Isky lifters are much taller than the old horizontal bar lifters I was using before. Oh well, there's another $90 gone.
At least Ebay got me some decent money for the 4.56 and 5.13 gears. Its going to be weird using 4.10s. I won't know what to do with streetable gears after running 4.88s and 5.13s for so long
Posted: Fri May 13, 2005 11:27 am
Hey all,
Just wanted to drop a note saying hi.
Just wanted to drop a note saying hi.
Posted: Fri May 13, 2005 11:29 am
That last post was me. Doh!
Posted: Fri May 13, 2005 11:34 am
Hi Greg,
Thanks for dropping in..
Greg's got a pretty bad ass Street Driven 1st gen Camaro...run's what 8.70?? Not sure exact times on it.
I need to start a new thread and have people post a little about themselves and their cars.. There are some very interesting cars and guys on here already.. I know most of you but not many of you know each other.
Stop in to the nitrous section now and then Greg, I think it'll get interesting...
Thanks for dropping in..
Greg's got a pretty bad ass Street Driven 1st gen Camaro...run's what 8.70?? Not sure exact times on it.
I need to start a new thread and have people post a little about themselves and their cars.. There are some very interesting cars and guys on here already.. I know most of you but not many of you know each other.
Stop in to the nitrous section now and then Greg, I think it'll get interesting...