Easy to bend brake line
Moderator: John_Heard
Easy to bend brake line
I use this all the time its some kind of "poly/metal" material I get it from my local Napa in a 25' roll . You can bend perfect 90's 180's or whatever by hand and straighten them back if you need to. It makes doing lines a lot easier than the old steel line.
-
- Posts: 238
- Joined: Thu Oct 12, 2006 1:12 pm
- Location: Colonial Beach VA If I am not at home or the track then I am probably at HOOTERS
being more pliable does it take away from the strength of standard steel line and its abilith to withstand high brake line pressures just curious?
74 chevy luv 355 sbc bracket car
70 Nova SS bracket / t.n.t car.
(Yes REAL SS 396 DISCS 12B0LT ETC)
WANTED DEAD OR ALIVE 68-74 NOVAS
TOO MUCH IS NOT ENOUGH!!!!!!!!!!!!!!!!
70 Nova SS bracket / t.n.t car.
(Yes REAL SS 396 DISCS 12B0LT ETC)
WANTED DEAD OR ALIVE 68-74 NOVAS
TOO MUCH IS NOT ENOUGH!!!!!!!!!!!!!!!!
Flaring sucks, that why i use industrial compression fittings. Not really legal but much easier for me!!
1974 Pontiac Ventura, 455P (9.5:1 comp.), 850DP, 3100 ''Tight'' 10'', 3.73's/28x13.5
Upgrading in June:
KRE 310cfm@.550 heads, 10.5 comp., hyd roller, 3800 tight 10'', better rear suspension.
Race Weight: 3750#'s
2007 best: 11.97 at 110 1.65 60ft.
Upgrading in June:
KRE 310cfm@.550 heads, 10.5 comp., hyd roller, 3800 tight 10'', better rear suspension.
Race Weight: 3750#'s
2007 best: 11.97 at 110 1.65 60ft.
thanks sc ! you saved me 134 bucks ( I'll put in my car for you ) I went to the site and looked at all the mastercool tools offered and the 71475 one is $134 cheaper than eastwoods price so I am going to get that kit great recommend on the site !
100% Pure Pontiac well all except for the rearend. its a Ferd .
Home of Dum Kat Raysin Praducks ..
Home of Dum Kat Raysin Praducks ..
-
- Posts: 81
- Joined: Tue Apr 24, 2007 11:45 pm
- Location: Va Beach
Check out www.toolweb.com. The stuff they show is P/N srrbr-ez316 fo 3/16" and srrbr-ez14 or 1/4". These are kits and have various pieces and line. Hope it helps
-
- Posts: 81
- Joined: Tue Apr 24, 2007 11:45 pm
- Location: Va Beach
PY being Performance Years, no I am not. I just went on line to check it out and went to the new products and part number search and it came up.
My locale parts shop, paint jobber, and even the Snappy truck has their catalog. It is on pg. 17 of the Sept/Oct 07 catalog. I havent been to the PY site in a bit. The 65 Rag GTO we are doing is in the buff paint and log some road time afore the weather goes to crap stage! Been to long in the making, but when you start with a firewall and not to much else takes some time to restore one! That was www.toolweb.com, and the company is S.U.R.&R. Did not put that in my earlier post, Appologies! Tried to search for them direct and found them in Akron Ohio but did not persue further. Have a Happy! P.S the Ferd rears a good thing!
My locale parts shop, paint jobber, and even the Snappy truck has their catalog. It is on pg. 17 of the Sept/Oct 07 catalog. I havent been to the PY site in a bit. The 65 Rag GTO we are doing is in the buff paint and log some road time afore the weather goes to crap stage! Been to long in the making, but when you start with a firewall and not to much else takes some time to restore one! That was www.toolweb.com, and the company is S.U.R.&R. Did not put that in my earlier post, Appologies! Tried to search for them direct and found them in Akron Ohio but did not persue further. Have a Happy! P.S the Ferd rears a good thing!
Who is online
Users browsing this forum: No registered users and 5 guests