AEM Data Logger

Discussion on Data Loggers, how to read your logs, what to improve, etc.

Moderator: RPM

Post Reply
Message
Author
User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

AEM Data Logger

#1 Post by Craig W. » Mon May 21, 2012 9:44 pm

No disrespect to Randy and if no one minds, I'm going to be posting some details about my experiences with AEM's new data logger. On paper it looks like a nice unit with a good price. So I'm going to pass on what I find when I get it all wired up.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: AEM Data Logger

#2 Post by Craig W. » Thu May 31, 2012 6:35 am

Looks like my data logger is on the way. Should have it in a couple days I suppose. AEM is also sending their new Dyno Shaft unit so that'll be very interesting to use and get to know.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: AEM Data Logger

#3 Post by Craig W. » Mon Jun 18, 2012 9:36 am

The data logger arrived last week while I was in Germany for work so looks like I get to play with it in the evenings this week! Looking forward to using it to diagnose my top end surge issue.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: AEM Data Logger

#4 Post by Craig W. » Fri Jun 22, 2012 12:18 pm

The Dyno Shaft is mounted on the tailshaft and I've started on installing the sensors for various pressures and temps. The Dyno Shaft is very light weight. Seems to fit the tailshaft well. I was concerned it wouldn't clear the floor pan but it did. Should be interesting figureing out the best way to make use of the torque data.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
John_Heard
Site Admin
Posts: 5707
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: AEM Data Logger

#5 Post by John_Heard » Fri Jun 22, 2012 1:15 pm

You'll have to snap some pic's for us. I'm still trying to get my head around how that deal works exactly.

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: AEM Data Logger

#6 Post by Craig W. » Fri Jun 22, 2012 1:29 pm

There's not much to see really. Here's the entire thing:
http://www.aemelectronics.com/dyno-shaf ... series-75/
Its completely non-contact, no batteries, etc. Wires into the can-bus input on the AQ-1 logger. So it doesn't take up a channel.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest