Master cylinder help

[Yellowchevelle]

Thanks for all the help guys! I ordered a chrysler style with an 1 1/32 bore (cardone pn 131822) this is supose to be a new master cylinder complete with reservoir. all the reman master cylinders were cast iron housings. just a little work with the brigeport and it will bolt right on ill post some pics when i get finished. The chevy stuff was ether to big or to heavy so thats why i went with the chrysler MC
Thanks again
Matt

[Yellowchevelle]

I found an excelent place to order oddball fittings i ordered some for my chrysler MC so i dont have to use an adapter between the MC and the line. www.fedhillusa.com
Hope this helps someone!
Matt

[Yellowchevelle]

Not quite done yet but here are some pics

[John_Heard]

Hey Matt I'm going to add the PN you found for that master to our tech note page for master cylinders -http://www.dragstuff.com/techarticles/R ... CylPN.html - can you tell me what ports it had on it and what the application was?

Thanks - John