PLATES

General Nitrous Discussion

Moderator: John_Heard

Post Reply
Message
Author
bluestreak
Posts: 45
Joined: Mon Aug 27, 2007 10:27 pm
Location: Tulare,Ca

PLATES

#1 Post by bluestreak » Thu Mar 26, 2009 12:27 am

:scratch: :scratch: Just for $h!ts and giggles
i took the plate off(due to some small isues)and compared it to the
1st one i had....on a nother eng. They both have 8 holes on top/bottom;
both sides(16).ONLY the one thats been on the car since the bigger
combo has smaller holes...I even asked the kids randomly which were bigger
and they can see it right away ,the difference. They are the same
plate(cheater,i think) whats up with the difference? will that hinder performance?
I think so (JMO) thanks for listening...Ps yes bigger combo has gone .05 slower
on 180 shot.
talk is cheap;lets race

bluestreak
Posts: 45
Joined: Mon Aug 27, 2007 10:27 pm
Location: Tulare,Ca

Re: PLATES

#2 Post by bluestreak » Thu Mar 26, 2009 12:36 am

BTW combo is in nother topic .other combo was simple
355 comp hyd .525/294-110 same heads (with some more work)as 388 isky roller
660/320-108......sportsman 2s WDYT
talk is cheap;lets race

bluestreak
Posts: 45
Joined: Mon Aug 27, 2007 10:27 pm
Location: Tulare,Ca

Re: PLATES

#3 Post by bluestreak » Thu Mar 26, 2009 11:40 pm

OOOPS!! the original plate i had is a supper power shot
that i purchased. So I got BONED lol :oops: from an e bay buy
on the plate i thought was a cheater. :oops: why i didnt notice
before install IDK :nutkick:
talk is cheap;lets race

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: PLATES

#4 Post by Craig W. » Thu Apr 09, 2009 4:52 pm

Anyone know anything about the HVH/NX Supersucker nitrous plate? I assume it won't accept NOS jets.

I've got $300 to spend with HVH for winning the Outlaw 8.5 championship in the Bounty Race series, so I'm thinking of trying one of their plates.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
79 Camaro
Posts: 738
Joined: Fri Feb 24, 2006 11:38 am
Location: Caney, Ks

Re: PLATES

#5 Post by 79 Camaro » Tue Apr 14, 2009 3:57 pm

Craig W. wrote:Anyone know anything about the HVH/NX Supersucker nitrous plate? I assume it won't accept NOS jets.

Never seen or heard of that one yet.. Do you have a link or a picture of it?

Thanks,
Adam
"THE THROTTLE IS THE DEVIL" By Mr. Willis
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: PLATES

#6 Post by Craig W. » Tue Apr 14, 2009 5:22 pm

http://www.highvelocityheads.com

Not much info there, but they've got a picture or two.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
79 Camaro
Posts: 738
Joined: Fri Feb 24, 2006 11:38 am
Location: Caney, Ks

Re: PLATES

#7 Post by 79 Camaro » Tue Apr 14, 2009 6:31 pm

Cool Thanks Craig!

Adam Wright
"THE THROTTLE IS THE DEVIL" By Mr. Willis
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers

Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests