FLOOR COATINGS

Fabrication, Welding, Shop Tools, Tips & Techniques

Moderator: John_Heard

Message
Author
User avatar
Hitchcock
Posts: 1535
Joined: Fri Sep 12, 2008 6:57 pm
Location: Wichita

FLOOR COATINGS

#1 Post by Hitchcock » Sun Jan 24, 2010 12:07 pm

What is the best bang for the buck and the best place to get it? I'm tired of having to use ass loads of oil dry. I want a coating that will let me quickly just wipe up oil based spills. My brother has a Harley in my garage. And guess what it leaks constantly!! Who has pics of there coated shop??
73 Vette, moly back half
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter

User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: FLOOR COATINGS

#2 Post by wikd69 » Sun Jan 24, 2010 4:42 pm

Hitchcock wrote:What is the best bang for the buck and the best place to get it? I'm tired of having to use ass loads of oil dry. I want a coating that will let me quickly just wipe up oil based spills. My brother has a Harley in my garage. And guess what it leaks constantly!! Who has pics of there coated shop??
I bought my stuff at Lowes - its a two part epoxy based Garage Floor Coating from Rust-Oleum. Mix the two materials together, mix in non-skid sand/additive (don't forget that) and then just roll it out. Toss out the little sprinkles to give it some color and you're good. Water proof, gas/oil proof, great stuff.

Ya gotta prep & clean the floor well and get the grease & oil up before laying down the coating but it's worth the effort. We ended up using a sort of (citric ?) acid based wash for the floor and it seemed to do well. I also used QuikCrete to fill and finish the grooves in the floor (rolling dollies and creepers across these is a biotch) before laying down the epoxy and the floor came out beautifully.
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

User avatar
Hitchcock
Posts: 1535
Joined: Fri Sep 12, 2008 6:57 pm
Location: Wichita

Re: FLOOR COATINGS

#3 Post by Hitchcock » Sun Jan 24, 2010 7:00 pm

How much did you have in it, including the citrus bath. I was down on my hands and knees today for several hours with brake cleaner scrubbing trans fluid off my floor.
73 Vette, moly back half
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter

User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: FLOOR COATINGS

#4 Post by wikd69 » Mon Jan 25, 2010 3:48 pm

Hitchcock wrote:How much did you have in it, including the citrus bath. I was down on my hands and knees today for several hours with brake cleaner scrubbing trans fluid off my floor.
I don't recall at this point. The cost of the epoxy floor covering kit is about $65, but I don't recall whether I used one or two of the kits. The kit (link below) is for a single car garage sized area (approx 250 sq ft).

Here's a link to the stuff I used. Obviously, the other materials, the non-skid grit & rollers, etc., would be over and above that. Just now reading the online description below, the kit comes with the cleaner. I'd forgotten.

http://www.homedepot.com/h_d1/N-5yc1vZ1 ... ogId=10053
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

User avatar
Pegasus
Posts: 111
Joined: Tue Sep 18, 2007 8:47 am
Location: Walnut Grove MO

Re: FLOOR COATINGS

#5 Post by Pegasus » Mon Jan 25, 2010 5:14 pm

Im going to be covering new concrete and the Lowes epoxy sounds good.
Does the anti-skid sand make it rough on creeper wheels ?

User avatar
evil16v
Posts: 254
Joined: Mon Feb 04, 2008 8:28 am
Location: N.E. Kansas

Re: FLOOR COATINGS

#6 Post by evil16v » Mon Jan 25, 2010 6:04 pm

I did mine with Coronado two part epoxy. it is a real deal industrial epoxy. We use it a work and it is as tough they come. forklifts, steel wheels, brake fluid for short amounts of time (less that an hour) battery acid... you name it. it is also tintable to your preference. it is NOT cheap but you will NOT be disappointed. The dealer we use says it was initially designed for airplane hangers.

I used two gallons between two applications, laid it THICK and still had a bunch leftover. this was the 12X30 portion of my three car garage. Hopefully I can do the two car side this summer.

I scrubbed the floor down with fast orange in the trouble spots and degreased and power washed it with super clean. Then I rinsed, degreased with the stuff that that I bought with the paint, rinsed, acid etched with muranic, rinsed, etched again, neutralized with ammonia, and rinsed... and rinsed. I let let it dry with fans for three days.then rolled on with a phenolic roller. I cut in the edges first with a brush. I'll see if i can find some pictures of my place and/or the plant.
Rob
'70 GS Stage 1, 466 BBB, 11:1,wiesco pistons, stock rod, ported Edelbrock heads, 1.55 rollers, single plain intake, 950 Quickfuel, aeromotive ss pump, TH400, 9" PTC converter, 3.90 12bolt, NOS Mini, NX Single entry Crossbar

User avatar
evil16v
Posts: 254
Joined: Mon Feb 04, 2008 8:28 am
Location: N.E. Kansas

Re: FLOOR COATINGS

#7 Post by evil16v » Mon Jan 25, 2010 6:09 pm

Here is the shop side.
Attachments
DSC02374-1.jpg
Rob
'70 GS Stage 1, 466 BBB, 11:1,wiesco pistons, stock rod, ported Edelbrock heads, 1.55 rollers, single plain intake, 950 Quickfuel, aeromotive ss pump, TH400, 9" PTC converter, 3.90 12bolt, NOS Mini, NX Single entry Crossbar

User avatar
Hitchcock
Posts: 1535
Joined: Fri Sep 12, 2008 6:57 pm
Location: Wichita

Re: FLOOR COATINGS

#8 Post by Hitchcock » Mon Jan 25, 2010 6:25 pm

That looks really good. I know when I do it it's gonna take a lot of prep work. I need to repaint my walls as well si I figured on taking a friday off and starting then and finishing sometime sunday.
73 Vette, moly back half
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter

User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: FLOOR COATINGS

#9 Post by wikd69 » Mon Jan 25, 2010 7:29 pm

Pegasus wrote:Im going to be covering new concrete and the Lowes epoxy sounds good.
Does the anti-skid sand make it rough on creeper wheels ?
Not at all - it's very very fine grit that you mix into the epoxy mix prior to rolling it out. It's just enough to keep the floor from being a hazard with oil or water underfoot...

You'll need to ask them (HomeDepot) for the stuff - it comes in a small tin, don't recall the brand name.
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: FLOOR COATINGS

#10 Post by wikd69 » Mon Jan 25, 2010 8:26 pm

evil16v wrote:Here is the shop side.
I'm very jealous cuz you have more machine shop toys than I do.
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

User avatar
evil16v
Posts: 254
Joined: Mon Feb 04, 2008 8:28 am
Location: N.E. Kansas

Re: FLOOR COATINGS

#11 Post by evil16v » Tue Jan 26, 2010 7:24 am

I haven't gotten to play much though. I need to finished the wiring on the flow bench (I have everything for it) and build fixtures. I still need to build my RPC for the mill (I have everything for it too). I already rebuilt a motor for it.
Attachments
DSC02366-1.jpg
Rob
'70 GS Stage 1, 466 BBB, 11:1,wiesco pistons, stock rod, ported Edelbrock heads, 1.55 rollers, single plain intake, 950 Quickfuel, aeromotive ss pump, TH400, 9" PTC converter, 3.90 12bolt, NOS Mini, NX Single entry Crossbar

User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: FLOOR COATINGS

#12 Post by wikd69 » Tue Jan 26, 2010 10:19 am

evil16v wrote:I haven't gotten to play much though. I need to finished the wiring on the flow bench (I have everything for it) and build fixtures. I still need to build my RPC for the mill (I have everything for it too). I already rebuilt a motor for it.
be sure to post pix of your setup when done
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: FLOOR COATINGS

#13 Post by pro70z28 » Tue Jan 26, 2010 12:18 pm

I used the Rustoleum 2 part epoxy also. The "Z" shop has been done for about 4 years or so now and other than a couple discolored spots from slag, cutting with the torch, it is in great shape. We also did our garage floor in 2002. It's staring to show a little tire wear from going in & out several times a day. (It doesn't like brake fluid though. Just make sure you wash it off right away if you spill and there's no problem).

Image
Image

User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: FLOOR COATINGS

#14 Post by wikd69 » Tue Jan 26, 2010 12:39 pm

pro70z28 wrote:I used the Rustoleum 2 part epoxy also. The "Z" shop has been done for about 4 years or so now and other than a couple discolored spots from slag, cutting with the torch, it is in great shape. We also did our garage floor in 2002. It's staring to show a little tire wear from going in & out several times a day. (It doesn't like brake fluid though. Just make sure you wash it off right away if you spill and there's no problem).

Image
Holy smokes !!!! What the heck is that thing ? That's not an early shot of your Camaro is it, before you went to the ProCharger ? Is this yet another killer ride you're putting together ? Inquiring minds want to know :smt003
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

pro70z28
Posts: 146
Joined: Sat Aug 04, 2007 12:24 pm

Re: FLOOR COATINGS

#15 Post by pro70z28 » Tue Jan 26, 2010 12:52 pm

Yea, I sold all that stuff & decided to go pro charger. That was a 1071 BDS with Enderle bird catcher & EFI injection. I just can't leave well enough alone. :D
Image

Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests