progressive problem

General Nitrous Discussion

Moderator: John_Heard

Post Reply
Message
Author
User avatar
chpcamaro
Posts: 773
Joined: Sun Nov 09, 2008 1:28 am
Location: socali

progressive problem

#1 Post by chpcamaro » Sun Sep 19, 2010 6:41 pm

well first off i went out today and could get the nitrous to work it worked fine the last time out. well it turned out to be the edelbrock progressive no matter what time i set it won't change all it will do is pulse for a 10th of a second then turn off i tried 2 seconds and 8 seconds and it still only runs for like a 10th of a second. so i guess it's going back for repairs i guess. anyone else have this problem?

the rest of the day at the track i posted in the general section
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: progressive problem

#2 Post by Craig W. » Mon Sep 20, 2010 11:09 pm

I've heard that the Edelbrock controller can have interference problems. Is it mounted near your coil, ignition box or other high powered sources?
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
chpcamaro
Posts: 773
Joined: Sun Nov 09, 2008 1:28 am
Location: socali

Re: progressive problem

#3 Post by chpcamaro » Tue Sep 21, 2010 11:02 pm

craig it happens when the car isn't even running and the ignition isn't even on i sent it back to edelbrock today. now i think this is a problem they have had when i called and told him the problem he didn't even ask me anything or tell me to check ot try anything he just said send it in and they will take care of it. i was waiting for a million questions and things to look for and nothing so off it went. :mrgreen:
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: progressive problem

#4 Post by Craig W. » Wed Sep 22, 2010 9:58 am

Sounds like they know exactly what the problem is.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

71Hellride
Posts: 80
Joined: Sat May 30, 2009 7:35 pm

Re: progressive problem

#5 Post by 71Hellride » Wed Sep 22, 2010 6:08 pm

I think they just has a bad batch of units. I've heard so many stories of these things doing this. Mine would work in the pits no problem. Take it out to make a run it'd come on then go off and come back on. Steve told me it wasn't the controller doing it. I moved it all over and it'd still do it. Put a different one on it and went right down the track.

User avatar
chpcamaro
Posts: 773
Joined: Sun Nov 09, 2008 1:28 am
Location: socali

Re: progressive problem

#6 Post by chpcamaro » Wed Sep 22, 2010 10:06 pm

i think your right 71hellride it is so friggen fustrating tho well we will see when it comes back
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: progressive problem

#7 Post by John_Heard » Wed Sep 22, 2010 10:34 pm

I've seen others have problems with them as well. Pull it out and put in another one problem goes away.

Also have heard much issues with electrical interference on those controllers.

User avatar
chpcamaro
Posts: 773
Joined: Sun Nov 09, 2008 1:28 am
Location: socali

Re: progressive problem

#8 Post by chpcamaro » Thu Sep 23, 2010 9:25 pm

well i am taking other actions so even if it stops working i can flip a switch and bypass the progressive and then i will work everything with the dig 7 box via ramp retard this progressive thing messed up my whole tnt day so that won't happen again :thumb:
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: progressive problem

#9 Post by Craig W. » Thu Sep 23, 2010 9:31 pm

I intentionally mounted my Cometic controller near my coil and 7531 box to see if it would freak out. Rock solid for the last year.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
chpcamaro
Posts: 773
Joined: Sun Nov 09, 2008 1:28 am
Location: socali

Re: progressive problem

#10 Post by chpcamaro » Thu Oct 21, 2010 11:07 pm

well i got my progressive back from edelbrock and so far it works just like it should well when dry testing it i haven't run it yet but it now runs through the whole cycle like it should so thats a good start next time out will be nov. 6 so i will post how it all goes then
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 16 guests