where to get a well machined 350 383 clearanced block

General Engine Discussion

Moderator: John_Heard

Post Reply
Message
Author
User avatar
prostude
Posts: 46
Joined: Mon Apr 26, 2010 11:16 am
Location: Syracuse NY

where to get a well machined 350 383 clearanced block

#1 Post by prostude » Wed Sep 01, 2010 9:34 am

looking for ideas on where i could get a well machined 350 383 clearanced block already found one place that I will probably go with but the wait time may be a little long
just looking to see what is out there
must be able to use a 2 pc rear main seal crank
Street car Old motor 10.80 @122 1.49 60' 355 6-71 stock gm heads stock rocker arms block hugger headers 1-5/8"x2.5" collector
the car ran in the 9's in the 60's with an olds motor.

User avatar
Bruce69Camaro
Posts: 1799
Joined: Thu Jul 23, 2009 11:07 am
Location: PA

Re: where to get a well machined 350 383 clearanced block

#2 Post by Bruce69Camaro » Tue Sep 07, 2010 2:09 pm

Contact Keith, from K-Star Automotive. See info in my signature.

Tell him you got his info from DragStuff and me....

Bruce
Those who think they know it all have no way of finding out they don't......... :scratch:

User avatar
prostude
Posts: 46
Joined: Mon Apr 26, 2010 11:16 am
Location: Syracuse NY

Re: where to get a well machined 350 383 clearanced block

#3 Post by prostude » Wed Oct 06, 2010 11:16 am

prostude wrote:looking for ideas on where i could get a well machined 350 383 clearanced block already found one place that I will probably go with but the wait time may be a little long
just looking to see what is out there
must be able to use a 2 pc rear main seal crank

Well I guess I am kind of anwering my own ? here

A friend of mine and I ended up going with a couple of CNC machined blocks from

Steves auto and Machine out of Little valley NY

Steve has built and run in the past a 6.6 second 210 plus mph 65 impala (checkout his website for pics)

These blocks are CNC machined and are awesome.
Steve and his Wife patty are great people to deal with.
I just figured I would put this info up for anyone looking for a good machine shop that has a rottler CNC machine.I was told this is the same machine that Greg anderson owns and there are only 8 in the world.

here is the sitehttp://www.stevesautoandmachine.com/
phone # 1-716-938-9130
If you call, tell Steve that you got his name from Mike From Syracuse NY.
Street car Old motor 10.80 @122 1.49 60' 355 6-71 stock gm heads stock rocker arms block hugger headers 1-5/8"x2.5" collector
the car ran in the 9's in the 60's with an olds motor.

Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests