Looking for some help. I have a 69 nova with full Calvert suspension and 275 drag radial. It should weigh around 3500-3700 pounds. What size and stall will I need to optimize my combo?
496 BBC
13.1
268 and 274 @.050
.750 intake .735 exhaust
108 LS
Holley HP 1000 carb
No nitrous
Turbo 400 full manual
transbrake
Dana 60, 4.10 spool
Little street use but would like to have the option to cruise around if needed.
Don't laugh, but I have a basically new B&M Holeshot 36-3800 converter. Will this even come close to working?
Thanks!
Converter Recommendation
Moderator: Marty Chance
-
- Posts: 193
- Joined: Fri Sep 19, 2008 6:34 am
- Location: Cheney, KS
Re: Converter Recommendation
Do NOT try to use that converter with a trans brake! That converter was not intended for a trans brake and you will brake it , that would make B&M look bad when it was not their fault as that converter is NOT designed to take the abuse a trans brake will put on it.
The motor should make peak HP around 7000 and peak torque around 57-6100 (depending on heads)
An 8" or 9" could be made to work well in this application for the way you want to race and drive it. The Neal Chance converter costs $1199
Marty Chance
The motor should make peak HP around 7000 and peak torque around 57-6100 (depending on heads)
An 8" or 9" could be made to work well in this application for the way you want to race and drive it. The Neal Chance converter costs $1199
Marty Chance
Neal Chance Racing Converters
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com
Re: Converter Recommendation
GET A CONVERTER FROM MARTY, I PROMISE IT WILL BE THE BEST MONEY YOU WILL EVER SPEND ON YOUR CAR!
Neal chance converters are second to NONE
Adam Wright
Neal chance converters are second to NONE
Adam Wright
"THE THROTTLE IS THE DEVIL" By Mr. Willis
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
"ALL I SEEN WAS HOOD!" By Mr. Heard
MAKO RS-1979
Sponsored By:
Total Removal Contracting-Tim Rogers
- Moparious Maximus
- Posts: 125
- Joined: Mon Oct 05, 2009 6:05 pm
- Location: Iowa
Re: Converter Recommendation
All I can say is that a good converter is worth every penny.
'63 Plymouth, Straight axle, Leaf springs, Drum brakes, 31x10.5wx15 Rears 3215lbs
Best time to date 7.99 @ 170 mph
572" Wedge 8-71 @ 28% OD, ALKY, Glide, Dana
http://www.youtube.com/watch?v=vq-xzFWHtFk
http://www.youtube.com/watch?v=JfyZSw59R_o
Best time to date 7.99 @ 170 mph
572" Wedge 8-71 @ 28% OD, ALKY, Glide, Dana
http://www.youtube.com/watch?v=vq-xzFWHtFk
http://www.youtube.com/watch?v=JfyZSw59R_o
Re: Converter Recommendation
Thank you for taking the time to respond. As for the heads, they are Brodix 2 plus rectangle ports.Marty Chance wrote:Do NOT try to use that converter with a trans brake! That converter was not intended for a trans brake and you will brake it , that would make B&M look bad when it was not their fault as that converter is NOT designed to take the abuse a trans brake will put on it.
The motor should make peak HP around 7000 and peak torque around 57-6100 (depending on heads)
An 8" or 9" could be made to work well in this application for the way you want to race and drive it. The Neal Chance converter costs $1199
Marty Chance
Who is online
Users browsing this forum: No registered users and 5 guests