Where can I find an 1/8" to 1/8" npt 45 degree fitting ??? Need to angle my solenoid for clearance!!!
Thanks
1/8 fitting
Moderator: John_Heard
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: 1/8 fitting
If you're looking for brass, I would bet McMaster Carr stocks it - http://www.mcmaster.com/
My 1971 X275 Nova | Facebook
Re: 1/8 fitting
CANT FIND ONLINE THERE EITHER....John_Heard wrote:If you're looking for brass, I would bet McMaster Carr stocks it - http://www.mcmaster.com/
-
- Posts: 80
- Joined: Sat May 30, 2009 7:35 pm
Re: 1/8 fitting
Grainger has them, but I can only find them in a 10 pack.
http://www.grainger.com/Grainger/Street ... Pid=search
Mcmaster has these
http://www.mcmaster.com/#brass-pipe-str ... ws/=c93ndi
I have a grainger close to the house and buy most stuff from there. If they don't have it they always get it the next morning.
http://www.grainger.com/Grainger/Street ... Pid=search
Mcmaster has these
http://www.mcmaster.com/#brass-pipe-str ... ws/=c93ndi
I have a grainger close to the house and buy most stuff from there. If they don't have it they always get it the next morning.
Re: 1/8 fitting
Go find your local Ace Hardware store. Around here they have a far better selection on nuts and bolts and fitting than most other places, at least in this area. Thats where I get all my stainless and grade-8 stuff as well as a lot of my brass fittings.dcw9360 wrote:CANT FIND ONLINE THERE EITHER....John_Heard wrote:If you're looking for brass, I would bet McMaster Carr stocks it - http://www.mcmaster.com/
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline
http://www.marsh-racing.com/harrys_camaro-1.htm
Who is online
Users browsing this forum: No registered users and 4 guests