applied nitrous reg question.
Moderator: John_Heard
-
- Posts: 44
- Joined: Mon Oct 22, 2007 5:51 pm
- Location: michigan
- Contact:
applied nitrous reg question.
i got my regulator from jeff from applied nitrous now i'd like to know if i can route the bleed off line from my regulator and tee it off into my-10 return line from carb [ the reg for nitrous fuel] or should i get a fuel block and go to that with the -3 line then to tank with a - 6 or -8 line ,,,,just wondering how you run that -3 line from the bleed off on reg:?:
mike , 1970 road runner 451 cu in indy 440-1 cyl heads, solid roller cam,T&D rockers 11.12 at 120 mph on motor.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Kenny is the #8 your running back to the cell your main bypass from the pump side? It doesn't want to backfeed into the bleeds?
On mine I run a separate small line back to the tank for the bleeds, I was concerned about tying it into the main bypass line.
On mine I run a separate small line back to the tank for the bleeds, I was concerned about tying it into the main bypass line.
My 1971 X275 Nova | Facebook
-
- Posts: 44
- Joined: Mon Oct 22, 2007 5:51 pm
- Location: michigan
- Contact:
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
That makes more sense. I really don't know what kind of pressure is in the main bypass line, I doubt it's a a lot but there should be some there.
My 1971 X275 Nova | Facebook
Who is online
Users browsing this forum: No registered users and 10 guests